RGB2
Twin D Restraint Belt
The RGB2 is essentially an RGB1 with alternative buckle and gear loops fitted, and is a work positioning/restraint belt (see the info sheet on restraint vs. fall arrest). This belt is fitted with two side mounted dee rings for ease of attachment and the back pad provides some lumber support and comfort, especially when tools are hung from the belt loops.
As with the RGB1, the RGB2 is normally used in conjunction with an RGL5 restraint lanyard, or a rope and grab system. The uses for this restraint belt are similar to the RGB1 (see RGB1 data sheet), however to prevent the user from dropping tools from height, all tools can be secured to the gear loops by a cord lanyard and also clipped to the belt when not in use.
It is important that a client understands the difference between fall arrest and restraint before using this item.
Data
| Accredited to: |
EN 358 |
| Material: |
45mm water repellent polyester |
| Fittings: |
High tensile alloy steel |
| Weight: |
0.7 kg |
| Features: |
2 x side dee, padded back support, gear loops |
| Max Arrest Force: |
RESTRAINT ONLY |
